Media center crashes and frezzes while opening the video section on windows 7.

Media center crashes while opening the video section on windows 7.
I have bought the new system at mine home and i am using windows 7 on my system. I have also using the windows media center from last 2 days. Now i have found the problem in the video section of Windows Media Center, both in my Xbox and computer. When i go to the video section and a few seconds later, the media center freezes and crash. I don’t know what i have to do solve this issue is there anyone to solve this issue, so that i can solve mine problem.
Reply With Quote
#2
Old 20-03-2011
SalVatore's Avatar
SalVatore SalVatore is offline
Member

Join Date: May 2008
Posts: 2,624
Re: Media center crashes and frezzes while opening the video section on windows 7.
I would like to advise you to follow the steps below so that you can solve your issue. From this setting you will lost all the custom setting, so you need to set up the custom. To do these go through these steps: first make click on the start button and then go to the run. Under the run type cmd and press enter. Now under the command prompt type the following and then press enter
%SystemRoot%\ehome\mcupdate.exe
When you complete this check your problem, i hope this could help you lot in solving your issue.
Reply With Quote
#3
Old 20-03-2011
Zavier Zavier is offline
Member

Join Date: Jun 2009
Posts: 313
Re: Media center crashes and frezzes while opening the video section on windows 7.
I think you need to perform the SFC /SCANNOW so that you can solve your issue. By performing the SFC /SCANNOW all system corrupted files are getting repaired, so therefore i hope this could help you lot in solving your issue. To perform the SFC /SCANNOW go through these steps below: open the command prompt via click on the start icon and then go to the run and on the run type cmd and hit OK button. Now under the command prompt type SFC /SCANNOW and press enter. When you finish this all scanning after that confirm your issue. i hope this will help you lot.
Reply With Quote
#4
Old 20-03-2011
DanielV DanielV is offline
Member

Join Date: Apr 2009
Posts: 945
Re: Media center crashes and frezzes while opening the video section on windows 7.
I suggest you do the clean boot so you can resolve your problem. To clean boot, follow these steps: click on Start up from the desktop and after that select on the run and type msconfig and press enter to next. Throughout this time system will was prompted to write the administrator password for confirmation, type the password and then carry on. Beneath the clean boot, select the general tab, after that make hit on the Start button and then make unchecked mark on the radio button named selective marking load startup items. After that select the services tab and choose the Hide All Microsoft Services check box, a blow to the Disable All button and then do a click on the OK button. I guess this will help a lot.
Reply With Quote
#5
Old 20-03-2011
Enriquee Enriquee is offline
Member

Join Date: Nov 2009
Posts: 827
Re: Media center crashes and frezzes while opening the video section on windows 7.
According to me you need to reinstall the media center so that you can solve your issue. To reinstall the media center follow the steps below. Make a stroke at the start and then go to control panel. Beneath the control panel select the program and then choose Programs and Features. Now, programs and features to make the check in the back, click the Windows features on or off. And after going to the media group, uncheck the check box for Windows Media Center and then press enter. When you have completed all this, it is now necessary to restart the computer and follow the same steps above and here you need to make its mark in the check box of Windows Media Center, so you can reinstall. I hope this can help you more.

Read more...

Error 1402 could Not Open Key while updating the windows vista

Error 1402 could Not Open Key while updating the windows vista
i using windows vista on mine system and I installed the Adobe Reader 8. My system works very well and I have no problem. Yesterday I downloaded the latest update for Adobe Reader and tried to install but I have error “ERROR 1402 Could Not Open Key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current I suggested uninstalling the current version and reinstalling the new version and upgrade, so you can solve your problem. i passed through its paces, but I'm still getting the same error, so I really do not know what to do. Please can anyone suggest me?
Reply With Quote
#2
Old 20-03-2011
Santy Santy is offline
Member

Join Date: Apr 2009
Posts: 482
Re: Error 1402 could Not Open Key while updating the windows vista
I would like propose you perform the Windows Installer Cleanup utility (MSICUU2.exe). For you to solve your problem Windows Installer Cleanup Utility (msicuu2.exe) is to assist in the installation problem, upgradation etc. is going to solve the error throughout the updation. To perform the MSICUU2.exe follows these steps: primary tick on the start button on desktop and then selects on the search box and then type the programs and features and press enter. Now get the programs and applications characteristics under that choose the program which you desire to eliminate and then strike on the uninstall/change knob. I hope this will help you lot in the resolve the problem.
Reply With Quote
#3
Old 20-03-2011
Shazid Shazid is offline
Member

Join Date: Feb 2011
Posts: 80
Re: Error 1402 could Not Open Key while updating the windows vista
Hi thanks for replying, I followed your suggestion but I'm not going to solve my problem. I uninstalled manually before Adobe Reader, after I had followed your suggestion. I run Windows Installer Cleanup Utility (msicuu2.exe) repeatedly, after that also I cannot uninstall Adobe Reader. Now as well i obtain the Adobe Reader 8 symbol on the desktop. Now i don’t know how to secure this matter. Can anyone help me to solve this issue?
Reply With Quote
#4
Old 20-03-2011
Orton Orton is offline
Member

Join Date: Apr 2009
Posts: 630
Re: Error 1402 could Not Open Key while updating the windows vista
I have dealt with this topic. To solve this problem, you can follow these steps. First, select the Start button from the desktop and then go to control panel. Under the control panel select the Add or Remove Programs in the Add / Remove programs, select Adobe Reader 8. Finally, now click on the remove. I hope this will help a lot. You can also try another way if you have the DVD / CD of Adobe Reader. Insert your adobe CD / DVD drive. After the Welcome screen in Adobe Reader select the Uninstall dialog box. I hope this will help you lot.
Reply With Quote
#5
Old 20-03-2011
Orion lella Orion lella is offline
Member

Join Date: Nov 2009
Posts: 291
Re: Error 1402 could Not Open Key while updating the windows vista
I would like to suggest you the following steps so that you can solve your issue, to do this you have to open the command prompt: select the start button from the desktop and then go to the run and type cmd on that and press enter. Now on the command prompt type the following and press enter after every command:-
cd "C:\Program Files\Common Files\Adobe\Acrobat\ActiveX"
del AcroIEHelper.dll
del AcroPDF.dll
del pdfshell.dll
exit
I hope this could help you lot to solve your issue.

Read more...

Unable to install the Drivers on windows 7 Professional 32-bit

Unable to install the Drivers on windows 7 Professional 32-bit
I have just bought the laptop and I am using the Windows 7 Professional 32-bit on mine computer and tried to install Windows 7 Professional 32-bit MSI sector controller driver but I will not find any driver for Windows 7 Professional 32-bit. I tried downloading the Windows 7 Professional 64 in the MSI download site overall, but I did not find any driver from there. Finally i auto detect the windows, but I found that I have Windows 7 Professional 64-bit driver instead of windows 7 Professional 32-bit. Now I do not I have to do. Can someone please suggest me to solve this problem?
Reply With Quote
#2
Old 20-03-2011
Sam.D's Avatar
Sam.D Sam.D is offline
Member

Join Date: Jan 2008
Posts: 3,734
Re: Unable to install the Drivers on windows 7 Professional 32-bit
I would suggest that if you do not have more than 4.5 GB of RAM, then your professional Windows 7 32 bit is useless. So I would advise you to use the operating system or install the Windows XP, so you can also download the drivers available for all and in my opinion you get the entire professional driver for Windows 7 32 bit world center Download MSI. I hope this will help a lot.
Reply With Quote
#3
Old 20-03-2011
Qamar Qamar is offline
Member

Join Date: Feb 2011
Posts: 74
Re: Unable to install the Drivers on windows 7 Professional 32-bit
Hi thanks for replying, I have over 5GB of RAM on my system. I've seen most of the drivers for Windows 7 62 bit in the MSI program download global and there is no option to download the driver for the Vista version. Can anyone tell where I can get the driver for Windows 7 32 bit or is there any where to find the driver for Windows vista. I have a friend who has 32 bit Nvidia driver GT130M and works great. Can you tell me what is the motherboard manufacturer is portable?
Reply With Quote
#4
Old 20-03-2011
Raine's Avatar
Raine Raine is offline
Member

Join Date: May 2008
Posts: 3,287
Re: Unable to install the Drivers on windows 7 Professional 32-bit
The motive the laptop and Nvidia and it will not form the nonspecific drivers and that since of the multiplicity rooted controllers. The laptop is diverse from the personal computer, consequently, require to analysis the MSI drivers and liberate them into the laptop. I would also recommend using Virtual Box since I have tried. I use the Windows 7 64 bit system and Windows 7 32-bit and reside with virtual box among no trouble and optimistically this will assist a lot in solving the crisis.
Reply With Quote

Read more...

Unable to use the webcame and getting error“Webcam driver open fail. Please restart camera or computer"

Unable to use the webcame and getting error“Webcam driver open fail. Please restart camera or computer"
i bought the new system on mine system and i am using the windows 7 ultimate and webcam. Since last week, the camera driver was not functioning and i obtain the blunder note "Webcam driver open fail. Please restart camera or computer". Later to reboot I get this message every time. I tried a lot of solution on the website but do not work. Can anyone solve this issue? It’s too urgent to me to solve this issue.
Reply With Quote
#2
Old 20-03-2011
Orion lella Orion lella is offline
Member

Join Date: Nov 2009
Posts: 291
Re: Unable to use the webcame and getting error“Webcam driver open fail. Please restart camera or computer"
I'd suggest disabling the webcam so that you do not receive this message. To do this, follow these steps: Click on the Start icon on the desktop and after clicking the control panel. Under the control panel is the application in different open the Windows Defender. Now in Windows Defender go to Tools and then click Software Explorer. Now select the program for all users after they found the webcam on and off. I hope this will help a lot in solving your problem.
Reply With Quote
#3
Old 20-03-2011
Nazmin Nazmin is offline
Member

Join Date: Feb 2011
Posts: 69
Re: Unable to use the webcame and getting error“Webcam driver open fail. Please restart camera or computer"
Hi, thanks for answering the solution. I tried the solution but do not work. I tried several times to his method, but I cannot receive any message until you restart the system. After reboot i have the same problem. I do not know how to solve this problem. I tried restoring the system and then I have run sfc / scannow, but that's not all worked for me. Can someone please fix this?
Reply With Quote
#4
Old 20-03-2011
stephenx's Avatar
stephenx stephenx is offline
Member

Join Date: Apr 2009
Posts: 290
Re: Unable to use the webcame and getting error“Webcam driver open fail. Please restart camera or computer"
I'd suggest updating the driver. Are the scanner and camera folder in Control Panel after right clicking on the camera icon then select properties? Now select the Driver tab. Now in the Driver tab, this is the “updated” driver and click on it. By clicking that you may be prompted to connect the connection between then make the connection. After making sure that they have allowed the device. If you cannot uninstall the device reboot. Now windows detect the new hardware and reinstall it. You can also check the website of the manufacturer of the camera for a driver. I hope this will help a lot to solve this problem.
Reply With Quote

Read more...

windows 7 starter registry.exe deleted

windows 7 starter registry.exe deleted
windows 7 starter registry.exe deleted by mistake.

i have fopund several software from the net to resolve the problem. but now my problem is that the downloaded repair file is a .exe file, which cannot run on the computer.

what is the solution to recover or reinstall this registry.exe

from which location is it deleted. if someone can help me out / and provide me this registry.exe file for windows 7 starter.

i have gone to some software vendors, and i have been advised to install the new windows 7 or compatible. i dont want to install new windows.

please reply me at rajmkapadia@gmail.com
Reply With Quote
#2
Old 21-03-2011
CodGuru CodGuru is offline
Member

Join Date: Nov 2008
Posts: 997
Re: windows 7 starter registry.exe deleted
Registry clear tools just cleans the invalid entries of the registry file. For restoring that you have two options here. First run System restore to fix the current situation of your system. Second you will need to find a similar system with similar operating system. Then from that you can export the registry files which you can add in your system back. And this works most of the time.
Reply With Quote

Read more...

Right click does not give a open with command

Right click does not give a open with command
I have windows 7 Operating System whenever I want to open a file by right click the open with command is not been displayed. Don’t know actually how it happened. Sometime back I had installed MS .Net Framework 3SP1, also I had cleaned my registry by using ccleaner toolkit. Not sure why this option is not getting displayed and I have no idea how did it happen? I want open with command back as I am in need of it. Kindly help!
Reply With Quote
#2
Old 21-03-2011
CitricAcid CitricAcid is offline
Member

Join Date: Nov 2008
Posts: 1,031
re: Right click does not give a open with command
Since you have lost open with command (use to open file like .cmd, .bat, .exe, .swf, etc.) to display different programs to open a file kindly follow the following steps:
Step 1: Click on Start menu
Step 2: Click on All programs
Step 3: Click on accessories
Step 4: Open notepad application
Step 5: Copy and paste the following content
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers\Open With]
@="{09799AFB-AD67-11d1-ABCD-00C04FC30936}"
Step 6: Save the file as “OpenWith.reg” (including double quotes in it).
Step 7: Open the file from the location where you have saved it.
Step 8: Clicked Continue/OK/Yes
Step 9: Check if your problem is solved
Reply With Quote
#3
Old 21-03-2011
Blazej's Avatar
Blazej Blazej is offline
Member

Join Date: May 2008
Posts: 863
re: Right click does not give a open with command
When you had selected more than one file (by using Ctrl+Click) then it will not display you Open-With command. While you want to open multiple files by selecting multiple files at the same time using Open-With command then in Windows 7’s Open-With command does not appears. Open-With command works for a single file being selected. You need to right click on a single file and then you able to select the Open-With command.
Reply With Quote
#4
Old 21-03-2011
Laiman Laiman is offline
Member

Join Date: Mar 2011
Posts: 53
re: Right click does not give a open with command
How can I get Open-With submenu to open my executable files? I want to open my executing files (say by using 7Zip or WinRAR) so that I can have a look inside archive. For that I require Open-With submenu to give me quick access to open the file with some program or the file manager. How can I be able to use quick access for executable files for my immediate access? Also, as I have some CMD files which I want to run but I am unable to run it as notepad comes up instead each time I want to open the CMD file.
Reply With Quote

Read more...

Picture folder thumbnails have a green box with check mark in it

Picture folder thumbnails have a green box with check mark in it
Sometime back I had some virus problem which occurred on my system. After removing it, whenever I open my picture folder, its thumbnails have a tick mark (green box) and double arrow (blue box) overlay icons mark on it. Prior to this I had installed Norton 360 and I had installed Windows XP Operating System. How can I get rid of these boxes and if it is possible then may I know how? Kindly give suggestion.
Reply With Quote
#2
Old 21-03-2011
$tatic $tatic is offline
Member

Join Date: Nov 2008
Posts: 1,222
Re: Picture folder thumbnails have a green box with check mark in it
A checked green box means the file is current, while a character in blue box indicates a file that is been changed since its last backup. Files excluded from the backup set display a slash in a gray box. If you do not need backup indicators feature you can turn it off by clicking Settings in the Norton 360 V2 main window. Disabled the Backup Status Indicators check box and clicking Close. After this, restart your system. Check the problem if it still persists but I am sure it would not occur after this.
Reply With Quote
#3
Old 21-03-2011
Gunilla's Avatar
Gunilla Gunilla is offline
Member

Join Date: May 2008
Posts: 982
Re: Picture folder thumbnails have a green box with check mark in it
When you are viewing your picture folder you had the view settings on. Or had you done any changes to your operating system prior to this problem which is occurring. If you are using Norton 360 V2 antivirus then they have a feature called “Backup Status indicators” which identifies which files are to be back up, which files are pending backup and which ones are excluded from backup. This feature is responsible for the tick mark (Green box) overlay icons.
Reply With Quote
#4
Old 21-03-2011
Max-well} Max-well} is offline
Member

Join Date: Mar 2011
Posts: 57
Re: Picture folder thumbnails have a green box with check mark in it
God bless you all!! You all are a lifesaver. You hit the nail on the head. I have always hated Norton for this sort of "helpful" things. I had McAfee, but my Service Provider changed to Norton and I had to switch. I will look all over the folder options and everywhere else. This is exactly what I needed -- those giant check-marks were driving me nuts. I would like to appreciate your efforts for helping me solving my problem. Thank you!
Reply With Quote

Read more...